Click on the above images to read more about solid wall and cage frame enclosures

---

Screen Bumpers

The screen bungee cords and tubing are covered with a screen bumpers

Use these foam bumpers to protect direct ball contact to the screen frame

$ 20.00 per ft

Custom lengths available.

Let us know what each individual length should be (i.e 6ft, 8ft, 10ft, or any other length)

Select footage when checking out

Need a sample?

Just order 1 ft from the above buy now link

Set of bumper pouches just for a 12ft wide x 9ft high screen

42 ft

$ 800.00

Set of bumper pouches just for a 16ft wide x 9ft high screen

50 ft

$ 950.00

Lower cost Screen Bumpers

A lower cost alternative to our bumper pouches is our carpet frame bumpers

with sewn in Velcro

$ 6.50 per ft

Select footage when checking out

without sewn in Velcro

$ 4.50 per ft

>

Select footage when checking out

$ 2.90 per ft

without Velcro

>

---

Screen frame assembly instructions

Track drape enclosure screen mounting on the box frame

The box frame is self standing but can be fixed to the floor and/or rear wall using 1 inch diameter tube clamps

Note! All screens are supplied with the above shown frame fittings but we don't supply the EMT conduit tubing as freight shipping these inexpensive items is too costly

1inch diameter EMT conduit piping is available at all good hardware stores (Lowes or Home Depot etc) for around $8.00 per 10ft length.

You'll need 14 of them for the complete box frame.

Frame size to Screen size

The frame should be around 2 inches per side greater than the screen size.

i.e. if the screen size is 12 ft x 9 ft (144" x 108") then the frame should be 12ft 4" x 9ft 4" (148" x 112").

If sourcing your own conduit pipe, you can use a conduit cutting tool like the above to cut the pipes to length.

Available on Amazon for around $35.00

12 part Screen Frame Tubing and Fitting set.

$ 499.00

 

Individual frame fittings

C, L, T, F3 or F4

$ 20.00 each

Select quantity and type when checking out

Enter Type in the comments field

The screen box frame assembly is quite straight forward but does require a little bit of effort and measuring

Start by cutting the conduit EMT piping to suit your screen size width and height and the EX pipes to suit your box depth requirements (usually from 1ft to 4ft).

The conduit pipes come in 10ft lengths so for a 12ft wide screen, the horizontal pipes

(HLB 1, HLB 2, HLF 1,HLF 2 and HUB 1, HUB 2, HUF 1 and HUF 2)

will be cut to 6ft each and for a 15ft wide screen they will be cut to 7.5 ft lengths each.

Build up the box frame as shown in the above image. Start with the floor level horizontal pipes and fittings,

then attach the vertical (VB 1, VB 2 and VMB ) pipes

and finally the upper level pipes and fittings HUB 1, HUB 2, HUF 1 and HUB 2.

Once the box frame is made up, you can start attaching the screen using the supplied bungee cords.

(see below on how to mount the screen with the bungee cords)

If you find that the box frame is slightly too small then you can extend the tubes an inch or two out of the fittings to suit.

If the box frame is too large then the pipes will have to be cut down in length to suit.

For added stability you can secure the frame to the floor and/or back wall with 1 inch diameter pipe clamps.

Buy 1 inch diameter conduit pipe directly from Home Depot with delivery by clicking on the above image

You'll require 14 lengths for the box frame screen frame

For convenience, we can arrange payment and shipment of all 14 x 10 ft lengths of conduit piping for you

$ 399.00

 

Set of 12 impact screen box frame tube fittings

8 F3 + 4C

$ 299.00

Note: this is just the frame fittings. You'll still require the 14 x 1 inch diameter conduit tubing from your local hardware store.

Set of 6 impact screen single frame tube fittings

(i.e. 4 L corners and 2 FC joins)

4FL + 2 FC

$ 149.00

Wall-to-Wall Curved Screen frame

Walll to Wall Curved screen frame Tubing set

$ 1,299.00

Click above image to read more about curved screens

---

Which side of the screen is the front side ?

---

Alternatively the screens can be mounted without a box frame directly to the floor and ceiling using clamps, hooks and bungee cords

You can also mount the screens like this without a screen frame but note then that there will be no side tension on the screen so some waving might appear in the screen

Mounting screen using rear extension frame only

---

How to mount the screen to the frame with the bungees

Insert the bungee cord through the grommet hole from behind the screen.

The ball now touches the backside of the black vinyl border.

Pull the cord over and around the frame/or 1" EMT pipe.

Lastly, loop the cord over the ball behind the screen.

---

Retractable screens

Click above image to read more about retractable screens and enclosures

---

Curved screens

Click above image to read more about curved screens and enclosures

Contact us with your screen size requirements

 

 

All camera products Club Tracking Camera Ball spin camera DIY Kits - Components Enclosures All products Software Business Installation and setup